1. <rp id="abbb4"><object id="abbb4"><blockquote id="abbb4"></blockquote></object></rp>

      1. <rp id="abbb4"><object id="abbb4"><blockquote id="abbb4"></blockquote></object></rp>

        Product Center 產品中心


        當前位置: 首頁 > 產品中心
         TE06 改性煤焦油環氧底漆
        來源: 點擊數:1022次 更新時間:2019-6-4 9:01:34
        產品名稱:OMELON TE06

        Specification Data     


        Binder Type/Pigment Type             Epoxy,thermoplastic polymers/Chemical

        and abrasion resistantpigments

        基料類型/顏料類型 環氧,熱塑性聚合物/耐化學和耐磨性顏料

        Colors                               TE0699(black),TE0660(brown)

        顏色 TE0699(黑色),TE0660(棕)

        Finish                               Matte

        表面 啞光

        Mixing ratio                         0.8(base)to 1(curing agent) by weight;

        混合比率                             1(base)to 1 (curing agent) by volume


        體積比 1 (基料):1(固化劑)

        curing agent CA15

        固化劑 CA15

        Specific gravity(Mixture)             1.20± 0.03Kg/Lt

        比重 1.20±0.03公斤/

        Solids by Volume                      55% (Theoretical)

        體積固體份 55%(理論上)

        pot life                              5 hours at 23℃73,4)

        混合使用期                            5小時,23℃條件下

        Flash Point(Abel)   Base:>42(>108);Curing Agent: >30(>86)

        閃點                                     基料:>42℃ ;固化劑:>30

        Theoretical covering capacity   5.5 Sq.m/Lt. (224 sq.ft/US gal.) at 75 microns (4 mils)DFT

        理論覆蓋率 5.5平方米/升,100μm干膜厚度

        Typical film thickness per coat Wet:182 Microns (7.2mils); - Dry: 100 microns(4 mils)

        單層膜厚                                 濕膜:182μm;干 膜:100μm

        Thinner             Material: EURO-thinner TH103;Cleaning: EURO-thinner TH03

        稀釋劑                                   材料:TH03,清洗:TH03

        VOC                                       >340 grams/Lt

        揮發性有機化合物 >340/

        Drying time                           Surface dry: approx 1 hour (at 23(73.4)

        and 50% relative humidity)

        干燥時間                             表干:1小時, 23(73.4)50%

        Overcoating time                       Min:12 hours at 23(73.4)-Max:7days

        重涂時間 最短:12小時,23℃條件下,最大:7

        Recommended primers                    When applying on top of aged coatings,

        make sure they are in sound conditions.

        推薦底漆                              涂刷在舊涂層上時,確保其狀態良好。

        Ambient temperature                 Min.: 5(41)-Max: 40(104).Avoid applications

        with relative humidity higher than 85%.

        環境溫度 最低:5℃,最高:40℃相對濕度不得大于85%

        Substrate temperature               Min: 4(7) above the Dew Point; Max: 40(104).

        底材溫度                            最低:露點以上4℃      最高:40

        Storage and shelf life                      The product should be kept in a cool well ventilated places

        儲存及有效期                   protected  from high temperatures. Containers MUST BE

        kept tightly closed.  Shelf life: 1 year.

        【刷新頁面】【加入收藏】【打印此文】 【關閉窗口】
        上一篇:TH01 醇酸稀釋劑 下一篇:PS01 醇酸木器底漆